Machine which is used for laser engraving

Typically from 65mm x 65mm [2.5" x 2.5"] at the smallest size to 356mm x 356mm [14.0" x14.0"] square at the largest, the laser marking or laser etching fields created range in size. The laser beam spot size is the next consideration. Creating the detailed, clear, permanent marking, that is typical of the laser marking or laser etching process, these small spot sizes and highly focused laser light energy.

Via software, laser markers and laser etchers are controlled. Several variables like in watts, laser power is measured, frequency and inches per second need to be controlled.

A technique in which laser technology is used to engrave, mark or etch any object is laser engraving. For many different reasons and purposes, people get things engraved. Since the result is very clean and precise, this method is much more popular than other engraving procedures. Involving exposing the object to a laser ray the method of laser engraving can be very complex and technical.

3 main parts, which are the laser, controller and surface, are used in the machine which is used for laser engraving. From the laser, the laser beam is emitted, and by the controller onto the surface, the patterns are traced.

For further detail about Laser Etching and Laser Engraving please visit the

Laser Engraving, Laser Etching, laser marking

Laser Marking and Laser Etching-Popular process in industries!

In a growing number of industries, laser marking and laser etching are becoming more and more important. To laser marking or laser etch your products, there are several reasons and some of the reasons are, Without destroying the product itself, the mark is extremely durable, permanent and in most cases cannot be removed, this feature can be witnessed in laser marking, laser etching, or laser annealing.

With very clear sharp results, the laser marking process is accurate, 100% repeatable, fast. Without any machine change over the laser mark or laser etch can quickly and easily be changed, and, this can also be done without replacing any tools. A simple drag and click computer operation is the changing of a laser marking or laser etch. With no additional purchases of added materials or supplies, the laser requires no consumables. Therefore costs of owning and running the laser marking or laser etching system and their operation and maintenance are virtually non-existent.

By simulated emission of radiation, the word laser is an acronym for light amplification. With an electrode set, laser gas, and electrical discharge, the laser beam is formed in a sealed tube. From a size of approximately 2mm as the beam exits the laser tube up to 7mm to 14 mm for most laser marking or laser etching operations, the beam is emitted into a telescope which expands the laser beam. Containing two mirrors located on high speed galvo motors, the expanded beam is directed into a laser head. Though a single element flat field lens to the product being laser marked or etched, the laser beam is directed off the mirrors.

For further detail about Laser Etching and Laser Engraving please visit the.

Laser Engraving, Laser Etching, laser marking